Custom made 10 ft tall bio-reactor Vessel System

Capacity: 500L!

The bioreactor systems contain configurations suitable for the cultivation of microbial cultures in an aerobic or anaerobic format

Size of tank: 10ft H x 600mm W x 600mm L

Material: 19mm glass with steel cage

Piping including valves, pressure gauges, regulators and filters to compressed air line and  N2 and CO2 lines.

All piping and connections must be fabricated in stainless stee, setup and other Control equipmment are included. More info refer to Product Info Section and our web on Project Done Section https://www.tankmakersg.com/bioreactor

10 ft Bio-reactor Tank

SKU: TM-Bio
S$128,000.00Price
  • Plug and play package where following items are included:

    1) The bioreactor systems contain configurations suitable for the cultivation of microbial cultures in an aerobic or anaerobic format

    2) The bioreactor vessel contain a working volume 500 L (not 1 litre or 2 litres

    3) The maximum height of bioreactor vessel will be 10ft

    4) Power supply needed: 230V, 50 Hz, single phase 13 A

    5) For Agitation requirement include:

    - 1 x impeller with at least 3 blades connected to a motor for agitation

    - 4 baffles or equivalent

    6) For Gassing requirement include

    - 3 gas control units, one to control compressed air, one to control N2 and another one to control CO2 Continuous and automatic aeration control for air, N2 and CO2

    - have Controllable gas flowrate with a minimum flowrate of 50 cubic cm/min or equivalent An automatic gas flow control via DO and/or pH controller

    7) For Inoculum feeding and cell sampling/harvesting requirement include

    - 1 set injection needle for inoculation

    - 1 set sampling device and

    - 1 set harvesting pipe/tube, height that is adjustable

    8) For Control Panel include:

    - Software to control the bioreactor operationController to control pH via base or acid addition with the aid of a peristaltic pump

    - Controller to regulate gas supply for air, CO2 and N2

    - Antifoam controller to control introduction of anti-foaming agent with pumpTemperature controller to regulate temperature of the culture

    - Security shutdown of heating system in case of overheating via Liquid level alarm, high pressure alarm and emergency stop button

    9) For Monitoring include:

    - 1 x temperature sensor

    - 1x pH probe1x DO probe

    - 1x level/foam conductivity probe

    These probes are autoclavable with steam at 121 deg C

    10) 1 month support include:

    - on-site technical and application training to SP staff after commissioning

    - warranty up to 5 years

Tel: +65 9079 5205 Email:  sales@tankmaker.com

Showroom Loaction:  As shown in the map

©2016 BY TANKMAKER.com